Atomic G01342W Manual De Instrucciones página 13

VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
6 pcs - H6 Phillips Flat Head Screw
4 pcs - H8 Zinc-Phillips Flat Head Screw
STEP 13:
Attach P10 Scorers onto the top of P5 End Top Rails using H8 Screws as shown in FIGURE 13.
Tighten, but do not strip out H8 screws.
Attach P15 Rod End Caps to the rod as shown in FIGURE 13.
Slide P16 Rod Handle onto each rod end with the small hole shown in FIGURE 13.
IMPORTANT NOTE: A small amount of liquid soap applied inside each P16 Rod Handle will allow them to
slip onto rod easier.
Attach P17 Ball Entry Cups onto P1 Side Aprons using H6 Screws as shown in FIGURE 13.
Tighten, but do not strip out H6 screws.
FIGURE 13
P17
H6
All Rights Reserved.
© 2012 Escalade Sports
THIS STEP REQUIRES FOUR OR MORE ADULTS.
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
PARTS REQUIRED:
H8
P10
P1
2 pcs - P10 Scorer
8 pcs - P15 Rod End Cap
P15
13
8 pcs - P16 Rod Handle
2 pcs - P17 Ball Entry Cup
P16
Note:
Small
Hole
For Customer Service Call 1-888-996-2729