Remote Control; Power Supply - Scott i-WXH125 Manual De Instrucciones

Remote control

1. MUTE
2. (STANDBY )
3. MEM / PROG (Memory/Clock set)
4. DISPLAY
5. SHUFFLE
6. MENU (access to iPod/iPhone menu)
7. DIM (Dimmer)
8. TIME
9. Number 0, 1,..9, +10
10. REPEAT
11. (STOP)
12. iPod/IPhone mode
13. MENU /
14. FM mode
15. / (Fast REW/FWD, TUNE +/-)
16. ENTER
17. FOLDER/MEMORY
18. VOLUME +/ -
19. (PLAY/PAUSE)
20. CD mode
21. AUX mode
22. FM ST (stereo)
23. EQ
24. SRS WOW
25. (Eject)
26. USB mode
AC power supply
Insert the AC adapter into a 110-240V AC ~ 50/60Hz mains outlet and the other end of the cord into
the DC IN 12V jack on the back of the unit.
Installing the clock back up batteries
The clock time can be maintained during a power failure by 2 x AAA/ LR03 batteries (not supplied).
However, the time may go forward or back slightly and may need resetting.
Inserting the batteries
1. Open the battery compartment at the bottom of the unit by pressing on the catch and removing the
cover.
2. Insert 2 x AAA/ LR03 batteries (preferably alkaline batteries) into the battery compartment, following
the polarity as shown on the diagram inside the compartment.
3. Replace the battery compartment cover.
Note: Replace batteries when the message "Low Battery" appears on the display.
Installing the remote control batteries
1.Follow previous procedures to insert the batteries.
Note: The remote control battery normally lasts for about one year, although it depends on how often
the remote control is used.
If the remote control is not working properly, replace the battery.
/

POWER SUPPLY

26
20
3 MEM/PROG
10
9
7
DIM
13
MENU
1
23
19
15
TUNE
11
MENU
6
25
8
GB-3
2
14
iPod/iPhone
12
SHUFFLE
21
5
18
24
4
16
15
TUNE
FM ST
22
TIME FOLDER
17
MEMORY