Using Handsfree With Bluetooth ® Wireless Technology; Incoming Call - Clarion BLT 370 Manual De Instalación

5. OPERATIONS FOR BLUETOOTH
PHONE TRANSCEIVER UNIT
Using Handsfree with Bluetooth
Note: The Clarion car stereo must activate the telephone interrupt mode to be able
to work with the Transceiver. Please refer the car stereo owner's manual of each
model for details.
Making a call
• Calling with the phone's keypad
1. Using the phone keypad, dial the phone number.
2. Press the phone "SEND" key - the phone is now connected to the

Incoming call

A ringing tone will be heard. The red and blue LED will alternate blink quickly.
Any music streaming will be temporary muted until a call is ended or rejected.
• Answering a call
Whenever your car stereo is operating, the Transceiver unit is in standby mode
awaiting the next call, when an incoming call arrives, the car stereo is muted
automatically and the ring tone is reproduced through your car's speaker.
1. Press the [
You may also answer the call by using your phone's answer keypad. In
this case, you can transfer the call to the Transceiver by following the
instruction in the section "Transferring a call" on page 21. However, some
phones will require user to activate transfer call via the phone itself in this
case.
Note:
• The Clarion car stereo must activate the telephone interrupt mode to be able to
work with the Transceiver. Please refer the car stereo owner's manual of each model
for details. Make sure that your mobile phone has set the Transceiver as the default
headset/handsfree. Please refer your mobile phone owner's manual for the
relevant setting.
20
1EN_OM_Receiver BLT370.indd 20
Transceiver and your car stereo system will be muted. Talk as normal
to the Transceiver unit, the voice of the person you're talking to will be
heard through your car speaker.
] button once to answer the call and speak as normal.
BLT370
AUDIO/MOBILE-
®
Wireless Technology
®
4/5/07 2:14:34 PM