Denon Professional DN-300BR Guia Del Usuario página 5

Operation
You can play audio from an audio device that sends its signal over a Bluetooth connection
(e.g., smartphones, tablet computers, etc.). DN-300BR uses Bluetooth CSR 4.0 and has a
range of up to 100 feet (33 meters).
Once you "pair" your Bluetooth device with DN-300BR, they are "connected" wirelessly. You
can play audio on your Bluetooth device, and it will be sent out of DN-300BR's outputs
(balanced and unbalanced).
Important:
•
DN-300BR will not receive audio from a phone call. While using it, we recommend
disabling your cellular connection, if possible.
•
Do not use DN-300BR near a microwave oven, which can interfere with the reception.
•
While DN-300BR is paired with a Bluetooth device, other Bluetooth devices cannot pair to
it. You must unpair ("disconnect") the current Bluetooth device from DN-300BR to make it
available to others.
To pair your Bluetooth device to DN-300BR:
1. If DN-300BR is off, use the included power cable to connect its AC input to your power
source. Press the power button to power on DN-300BR. The Status Light will flash
slowly.
2. Make sure your desired Bluetooth device has its Bluetooth connectivity on and is within
range. DN-300BR will automatically try to pair with the last-paired Bluetooth device, if any.
If you are using that Bluetooth device again, you can start playing audio immediately.
If you want to use a different Bluetooth device, continue to Step 3.
3. Press and hold DN-300BR's Pair button for 3 seconds. When the Status Light starts
flashing quickly, release the Pair button.
4. On your Bluetooth device, enter its Bluetooth settings menu, and select DN-300BR.
Note: (Some older Bluetooth devices may require you to enter a PIN. If this is the case,
enter 0000 as the PIN.)
5. On your Bluetooth device, start playing audio.
To adjust your volume level, we recommend setting the volume control of each of your
devices in the following order:
i. your Bluetooth device
ii. DN-300BR, using its Level Knob
iii. your mixer, if any (its input channel level[s], then its main output level)
iv. your loudspeakers
Set each volume level as high as possible without creating distortion or any "clipping" of
the sound.
Important: DN-300BR will not receive audio from a phone call. While using it, we
recommend disabling your cellular connection, if possible.
To unpair your Bluetooth device from DN-300BR, do one of the following:
•
Enter your Bluetooth device's Bluetooth settings menu, and disconnect from DN-300BR.
•
Press and hold DN-300BR's Pair button for 3 seconds, and then release it. DN-300BR will
unpair from your Bluetooth device and be available to pair to another one.
5