Unpack/Pack The Direct Print Module; Installation And Initial Operation; Install The Print Mechanics At Machines - Carl Valentin DPM IV Serie Guía De Referencia Rápida

Unpack/Pack the Direct Print Module

CAUTION!
Danger of injury by imprudent handling when lifting or placing the printing system. Risk of crushing by
unexpected linear movement of the printing carriage.

Do not underestimate the weight of the printing system (9 ... 16 kg).

Do not lift the printing system at the hood.

Protect the printing system against uncontrolled movement.

Check the direct print module for transport damages.

Remove the foam transportation safeguards near the printhead.

Check delivery for completeness (see operating manual).
NOTICE!
Retain original packaging for subsequent transport.

Installation and Initial Operation

NOTICE!
Important information on installing can be found in the operating manual (the complete documentation is included in
the scope of delivery on CD-ROM, and can also currently be found on our website).
NOTICE!
Starting from an angle of inclination > 30°, the optionally available brake (A) is mandatory.

Install the Print Mechanics at Machines

NOTICE!
Only trained and qualified technical personnel may carry out installation.
D
D
D
D
C
NOTICE!
When using a counter-pressure plate that does not come from the manufacturer, the conditions of the operating manual
have to be observed.
A
B
English
•
At the side parts of print mechanics (C) are two M6
threads (D) on the upper and back side which can be
used for the attachment of print mechanics to a
machine. The maximum thread depth is 12 mm.
•
The connecting cable (A) to control unit can be led from
the printing system to top or to the side.
•
The pneumatic tube Ø 8 mm (B) can be led from the
printing system alternatively to top or to the side.
A
DPM IV
63