Assembly - MSA XTIRPA Pole Hoist System Manual De Instrucciones Y Seguridad

3.4.

Assembly

(1.) Place the SRL or the winch on the ground near the pole hoist
system and extract approximately 10 feet of the cable or rope lifeline
from the device.
(2.) Remove the guide pulley pin (A). Pass the cable or rope lifeline
approximately two (2) feet past the swivel head (B). Reinstall guide
pulley pin with cable or rope lifeline underneath the guide pulley (C).
Fig. 12
(3.) Rotate swivel head to allow cable or rope lifeline to enter swivel
head pulley (A).
Fig. 15
Step 2A Fig. 13
Step 3A
MSA/XTIRPA™ Pole Hoist System
Step 2B Fig. 14
Use
Step 2C
US
17