Care And Maintenance - Elite ARION DIGITAL SMART B+ Manual Del Usuario

in a doorway or near a stable object, in order to have a
support while acquiring the necessary balance.
3) Make sure the Arion Digital Smart B+ rests on a flat,
stable surface.
4) Start pedalling and look ahead, like on the road.
Even if you would instinctively tend to look at the front
wheel, you will keep balance better and pedal "in a
straight line" if you concentrate on an object located
2.5 – 4 metres (10-15 feet) in front of you.
5) If you start leaning or shift to the side of the drums,
correct your position with very light steering
movements. If you steer to much you will lose balance
or end up over the side of the rollers.
6) Keeping a fast and smooth pedalling style will help
you stay balanced on the rollers, thanks to the
gyroscopic effect of the wheels.
7) At first, pedalling on the rollers will give you a feeling
of instability, and moving the handlebar too abruptly or
pedalling heavily can make you lose control. The big
advantage of the rollers, compared to standard training
tools, is that the rollers teach you to reduce the
movement of the upper part of your body and maintain
a steady pedalling pace.
END USE
• For carrying, or to save space when not using the
roller, it is advisable close the frame. Pay attention to
the position of hands when closing the roller, to avoid
squashing them between the two side members. To
close the frame, place hands at the ends of the side
members (Fig. 9).
• Therefore avoid placing hands in such a way that can
become squashed between the side members (Fig. 10).
• To facilitate carrying, it is advisable to hold it by the
special grips located at the hinges (Fig. 11).

CARE AND MAINTENANCE

1) Prolonged exposure to direct sunlight can cause
deformation of the technopolymer rollers. Do not use
or keep the rollers in places where they are exposed to
direct sunlight.
2) Always clean the rollers after use. Only use a damp
cloth. Do not use solvents or harsh detergents.
3) If the Arion Digital Smart B+ is not going to be used
for a prolonged period, release the drive belt, bringing
it out of its seat, or close it, otherwise the belt's tension
could cause early loss of transmission efficiency.
4) The coupled bearings on the roller do not require
lubrication and are practically maintenance-free.
5) Periodically check the roller clamping screws, make
sure that they are still tight but not so tight as to
damage the plastic frame.
6) Do not leave the charger connected to the roller.
7) In case of wear or breakage of the drive belt, replace
it by proceeding as follows:
A) Remove the rectangular covers (C) from both front
longitudinal members (with aid of a screwdriver if
necessary), and the screws and washers from the front
roller on both sides, using the Allen key I) supplied.
B) Undo the fixing screw (Fig. 12).
C) Undo the fixing screw located on the longitudinal
member on the side opposite the magnetic resistance
of the middle roller G (Fig. 13).
D) Replace the belt, refit the rollers in their correct
seats and secure all the screws again.
E) Position the rectangular cover on its seat.
8) Drive belts and other spare parts for the Arion Digital
Smart B+ are available from you local Elite dealer.
ATTENTION
• Keep people, children and animals away from the
roller during use, since the moving and rotating parts of
the roller and the bicycle can cause damage in case of
contact.
• Before starting training, position the trainer in a dry
place, away from potentially hazardous objects
(furniture, tables, chairs, etc.) in order to avoid any risk
of inadvertent or accidental contact with them.
• The roller is designed for use by a single rider.
• Do not use the bicycle brakes to stop. Rest a foot on
the Arion Digital Smart B+ frame and allow the bicycle
to come to a stop.
• Do not store the Arion Digital Smart B+ in wet or
damp places. The electronic components could
become damaged.
EN
11