Control Panel - Chacon 34949 Manual De Usuario

functioning.
System Arm System armed by Remote Control
System Disarm System disarmed by Remote Control
System Home Arm System home armed by Remote Control
Arm by App System armed by App
Disarm by App System disarmed by App
Home Arm by App System home armed by App
System has auto-armed according to the 'Timed Arm/
Arm as Scheduled
Disarm' schedule
System has auto-disarmed according to the 'Timed Arm/
Disarm as Scheduled
Disarm' schedule
Remote Control SOS button activation has triggered an
System SOS Alarm
emergency alert
(Zone 1) Alarm A zone no. 1 sensor has been triggered
(Zone 1) Tamper Unauthorized attempt to remove the cover of a zone no. 1
Alarm sensor.
Door/ Window Sensor:
Step 1: To power up the Sensor, remove the Battery Tab
Step 2: Attach the Adhesive Pads to the back of the Transmitter and Magnet
A zone no. 1 sensor battery is low. Change the
(Zone 1) Low Battery
battery as soon as possible.
Control panel AC failure Lost connection with AC Power
Control panel AC recovery Regain connection with AC Power
Installation

Control Panel

Wall Mounting
The Control Panel can be wall mounted using the Wall Bracket provided.
Using the screws supplied, mount the Wall Bracket onto the wall (ensuring that the arrow
on the bracket is pointing upwards), then match-up the Wall Bracket hooks to the holes
①
at the back of the Control Panel, and slide the Control Panel down onto the Wall Bracket.
②
Step 3: Place the Sensor on the door/ window frame and the magnet on the door/
window ensuring that the distance between them is not greater than 1cm when the
door/ window is shut.
Horizontal orientation
Vertical orientation
PIR Motion Sensor:
Warning - Do not install
Near air conditioning/ heat
Facing direct sunlight
sources
Free-standing
The Wall Bracket can also be used as a tabletop stand.
Turn the Wall Bracket upside down so that the arrow is pointing downwards, and
align the screw hole underneath the Control Panel Battery Cover with the screw
hole on the Wall Bracket. Use the remaining screw to secure in place.
Warning:
A weak WiFi signal can seriously affect the performance of this Security Alarm
System. Please make sure that the Control Panel is located as close as possible to
the main Router for optimal connectivity.
Direction of motion and Detection Range
＜1cm
8m Max.
It is easier to detect objects that move sideways in front of the sensor, but more
Facing moving objects
①
②
110 °