Cleaning The Appliance - Moulinex LM9051B1 Manual De Instrucciones

(decrease) buttons.
• You then have to validate the temperature chosen by
pressing the
• OK button.
• The red indicator light illuminates and a 'beep' will
sound to inform you that the cooking has started.
• At any point you can adjust the motor onto either:
- slow speed (position 1) to mix liquid ingredients (e.g.
to make sauces).
- quick speed (position 2 onwards) to mix solid
ingredients.
BLENDER MODE (without cooking)
• Select a speed by turning the speed
0
selector to the right. The mixing starts
max
and the time appears on the screen.
ice
In blender mode, you can select up to 5 speeds with
different mixing types.

CLEANING THE APPLIANCE

• Do not immerse the appliance in water. Never put the
motor unit (A) under hot running water.
• Clean the jug immediately after use.
• Fill up the jug with 1 litre of hot water along with 2 or
3 drops of washing up liquid Only use the
recommended amount of water and washing up
liquid. An excess of washing up liquid creates more
foam and consequently can lead to overflowing.
• Use the automatic Autoclean programme: P3 or P4
(depending on model*) to carry out a prewash of the
bowl.
• Once the program has stopped, unplug the
appliance.
• Press on the trigger (d2) then remove the blender jug
(D).
• Place the jug on a flat surface.
• Unlock the lid by turning it a quarter turn clockwise.
Remove the lid with care.
• When the lid is cool, remove the carrier seal. To do so,
grip it between your thumb and index finger, then
pull to extract it. The seal dismounts without risk of
deterioration (Cf. Fig. 12).
The pulse speed can be found to the left of
position 0.
• Turn the speed selector to position 0 to stop the
appliance.
• Press on the trigger (d2) then remove the blender jug
(D). If you wish to program an operation time which
stops automatically:
• Adjust the operation time with the aid of the +
(increase) and - (decrease) buttons.
• Select a speed by turning the speed selector. The
count time appears on the screen.
• The motor stops automatically at the end of the
count time.
Ice crushing button: The "Ice" button starts the ice
crushing operation; this takes 30 seconds. You can stop
the appliance as required by pressing the "OFF" button.
You can crush a maximum of 6 to 8 ice cubes.
• Finish cleaning the jug with the aid of a sponge.
• Rinse the inside of the jug and the lid under running
water.
• In the event of the heated part of the jug getting
extremely dirty, leave to soak for a few hours in a mix
of water and washing up liquid to help get it clean.
• Take care when cleaning the blades
(d3) in the blender jug and when you
empty the bowl as they are sharp.
9
• Use a damp cloth to clean the motor unit (A). Dry it
carefully.
• The detachable parts (lid, seal, measuring cap,
cooking basket) can be cleaned with a sponge and
hot soapy water.
• To clean the glass lid, do not use the abrasive side of
the sponge to prevent the glass from being scratched.
• The removable blade assembly (depending on the
model) can be washed under the tap or using a brush.
15