Glass Bowl - Home Depot Home Decorators Collection 51560 Guía De Uso Y Cuidado

Assembly - Attaching the Lights (continued)
2
Installing the bulbs and attaching
the glass bowl
Do not over tighten the hex nut, overtightening the
hex nut may cause the glass to break.
To prevent breaking of the glass and to avoid personal
injury, hand tighten all parts in order, DO NOT use any tools to
tighten nut or finial.
Remove the finial nut (P), bottom cover (O), hex nut (N), and
rubber washer (M) from the threaded nipple of the light kit
fitter assembly (I).
With power off, install the three CFL Light bulb, (14-Watt
maximum included) (J) by screwing into the light bulb
sockets.
Position the glass bowl (K) over the threaded nipple.
Re-install the rubber washer (M), hex nut (N), and bottom
cover (O) to the threaded nipple to secure the glass shade
properly.
Re-install and tighten the finial nut (P).
Assembly - Assembling the Fan Without the Light Kit
1 Assembling the fan without the
light kit
Remove the three light kit mounting screws (PP) on the side of
the light kit fitter assembly (I).
In order to use the fan without the light kit, remove the switch
cup cover (R) from the light kit fitter assembly (I) by removing
the center hex nut inside the switch cup cover (R), and then
thread the switch cup cover off of the threaded nipple on the
top of the light kit fitter assembly (I).
Press the plastic plug (CC) (provided) into the center hole of
the switch cup (I).
Position the switch cup cover (R) onto the switch cup and
reinstall the light kit mounting screws (PP).
E
J
K
M
N
O
P
H
R
15
Please contact 1-800-986-3460 for further assistance.
PP
CC
HOMEDEPOT.COM/HOMEDECORATORS