Assembly - Attaching the Lights
1
Attaching the light kit fitter assembly
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
Notice the location of the fan's slide switch. This is the
switch used to change the fan's directional rotation. For more
information on the operation of this switch, see Operating
Your Fan on page 16.
This light kit cannot be transferred to another fan.
Remove the three screws (OO) on the switch cup cover of
the light kit fitter assembly (I).
Connect the wires from the light kit fitter assembly (I) to
the wires from the switch cup by connecting the molded
adaptor plugs together (blue to black, white to white).
Carefully tuck all wires and splices into the switch cup.
Align the three holes in the switch cup cover of the light kit
fitter assembly (I) with the three holes in the switch cup.
Re-install the three screws (OO) that were removed in first
step to secure the light kit fitter assembly (I).
H
I
14
OO