Safety Guide Lines; Model Identifi Cation - Pixsys ATR 902 Manual Instalador

Introduction
Thanks for choosing a Pixsys device.
The plug-in controller ATR902 is specially dedicated to applications in the
glass, metal and pottery industry.
This controller provides high accuracy of the programmed fi ring cycle and
reliable monitoring of the temperature. It can store up to 15 completely con-
fi gurable programs, each consisting of max. 18 segments. The fi rst 5 cycles
can be associated to a mnemonic name (see parameters 48-52). Delayed start
is also available as well as other software functions. A relay output can be
confi gured as alarm. All parameters are protected by a password to avoid
unauthorized access.

Safety guide lines

1
Read carefully the safety guidelines and programming instructions contained
in this manual before using/connecting the device.
Disconnect power supply before proceeding to hardware settings or
electrical wirings.
Only qualifi ed personnel should be allowed to use the device and/or service
it and in accordance to technical data and environmental conditions listed in
this manual.
Do not dispose electric tools together with household waste material.
In observance European Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in accordance with national
law, electric tools that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility.

Model identifi cation

2
The ATR902 series includes only one version which is described into the
following table:
Power supply 230 Vac ±15% 50/60Hz – 3VA
ATR902-12ABC
10 ATR902 - User manual
1 sensor input + 2 relays 1A