Troubleshooting; Cleaning And Maintenance; Storage; Environmental Instructions And Disposal Information - Parkside PSHL2 B1 Instrucciones De Funcionamiento Y De Seguridad

Troubleshooting / Cleaning and ... / Storage / Environmental instructions ...
z Troubleshooting
Error
The filter does not darken in a
normal way or flickers.
The reaction is slow.
The visibility is poor.
The welding helmet slips.
z Cleaning and Maintenance
Do not use any harsh cleaning agents to
„ „
clean the helmet casing
Never bring the UV filter
„ „
with water.
Clean the product with a soft and dry or
„ „
moistened cloth or clean it with a cloth
moistened with disinfectant.
z Storage
Keep the device in a dry place and out
„ „
of the reach of children.
During storage, make sure the LED light
„ „
14
switch is switched off [left position
"OFF"].
62 GB/MT
All manuals and user guides at all-guides.com
The protector does not darken in a
normal way or flickers.
The arc sensor is not clear.
The welding current is
too low.
The ambient temperature is too
low / high.
The sensitivity is too low.
The protector / the protective
screen is dirty.
The protective film on the protec-
tive screen was not removed.
The ambient light is not sufficient.
The wrong darkening shade has
been set.
The headband 5 has been put
on incorrectly.
.
2
into contact
8
Cause
Clean the protector or replace it.
Clean the arc sensor's surface.
Set the sensitivity to the
maximum degree.
Only use the welding
helmet in temperatures
between -5 °C and +55 °C.
Set the sensitivity to a
higher setting.
Clean the protector and the
protective screen.
Remove the protective film.
Apply more light to your work
surroundings.
Reset the darkening shade.
Put on the headband 5 again
tighter.
z Environmental instructions
and disposal information
Don't waste, recycle!
The device, accessories and packaging
should be recycled in an environmentally
friendly manner.
Do not throw the auto-darkening welding hel-
met into household rubbish, fire or water. If
possible, non-operational equipment should
be recycled. Contact your local retailer for
information.
As the consumer you are legally
obliged (by the German Battery
Solution