Hansgrohe 10452180 Instrucciones De Montaje página 4

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The basic set must be sealed in by the customer. (see
page 33)
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
The product is exclusively designed for drinking water!
Assembly Bath-shower mixer / basin mixer see
page 32
Assembly Bath Spout see page 34
Assembly Bath-shower mixer see page 36
4
English
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 70°C
65°C
max. 70°C / 4 min
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 31)
Freestanding tub with outside covering.
*
< 30 min. = extension 60 mm (article
number #97686000)
Spare parts (see page 59)
Special accessories (order as an
extra)
sealing foil #96441000
Finish set (see page 38)
Test certificate (see page 31)