Installation Procedure - Akasa FREEDOM FORCE Instrucciones De Instalación

 PRODUCT COMPATIBILITY
The Freedom Force cooler is compatible with
three types of mounting dimensions:
Type A 61.5mm distance between the centers
of the mounting holes
Type B 53.2mm distance between the centers
of the mounting holes
Type C 43.2mm distance between the centers
of the mounting holes
 COMPATIBILIY LIST
Mounting hole pitch
A 6.5 x 6.5
Radeon HD 4870
Radeon HD 4850
Radeon HD 4830
Radeon HD 3870
Radeon HD 3850
Radeon 2900 XT
Radeon 2900 Pro
Radeon X1950 XTX 53. x 53.
B
Radeon X1950 Pro
Radeon X1900 XTX
Radeon X1900 XT
Radeon X1900 Crossfire
Radeon X1800 XT
Radeon X1800 Crossfire
Radeon X1800 XL
Radeon X1800 GTO
43. x 43.
C
Radeon HD 2600XT
We do our best to make sure the compatibility list is up to date. Our VGA coolers are designed to be
compatible with all the ATI & NVIDIA reference design VGA cards we list, however occasionally some
manufactures deviate from the reference design and therefore we cannot guarantee compatibility with these
cards. If you are not sure please contact us for help.
3
Compatible VGA card hole dimensions
A
61.5mm
53.2mm
B
43.2mm
C
GPU
A
B
C
ATI NVIDIA
Geforce GTX 285
Geforce GTX 280
Geforce GTX 260
Geforce 9800 GTX+
Geforce 9800 GTX
Geforce 9800 GX2
Geforce 9800GT
Geforce 9600 GT
Geforce 9600 GSO
Geforce 8800 GTS (G92)
Geforce 8800 GT
Geforce 7900 GTO, GTX, GT
Geforce 7800 GTX, GT
Geforce 6800 Ultra
Gefore 6800 GT
Gefore 6800 GE
Geforce 6800 GS
Geforce 6800 XT
Geforce 6800 LE

 INSTALLATION PROCEDURE

VGA card preparation
. Unplug the stock cooler fan connector.
. Undo all screws or pins securing the original cooler and remove from the card.
3. Clean the surface of RAM and GPU chips.
Note: Use Isopropyl or Akasa Timclean to remove thermal grease residue.
Freedom Force cooler installation
. Attach the aluminium heatsinks (part A) to each RAM chip (on the GPU
side of the VGA card) by removing protective liner from the heatsinks and
gently pressing it down once located correctly over the RAM chips and
RAM DAC (GTX 200 series only)
Note: The self adhesive thermal tapes are not reusable. If you need
to reattach the heatsinks replace the thermal tapes with akasa
AK-TT12-80.
. Apply the thermal compound (part C) on the GPU surface; a thin layer
over the entire surface is ideal, extra thermal compound will not improve
performance.
4