Factory Reset - Alesis SampleRack Guia Del Usuario

Copying a Kit
1. Press and hold the Cursor Down and Cursor Right
buttons for 2 seconds to enter the Save menu.
2. Move the cursor to the COPY KIT option by pressing
the Cursor Up or Cursor Down buttons.
3. Press Cursor Right to enter the COPY KIT
submenu.
4. Press Cursor Left or Cursor Right to select the kit
that you would like to copy.
5. Press Cursor Down and then press Cursor Left or Cursor Right to select the location that you would like to
copy the kit to.
6. Press Cursor Down to highlight Confirm and then Cursor Right to copy the kit.
7. To exit the COPY KIT submenu, press the Cursor Down until Exit is highlighted, and then press the Cursor
Right button. Alternatively, press and hold the Cursor Down and Cursor Right buttons to exit this menu.

Factory Reset

To reset the internal kits and global settings to the factory default settings, hold the Cursor Left and Cursor Right
buttons while powering on the SampleRack. This will not affect samples or kits stored on your SD card.
10