Schubert Etude 61 MK II Manual De Instrucciones página 20

BEFORE PERFORMANCE
Using AC-DC power adapter
• Please use the special power adaptor was equipped with this electronic keyboard or the power adaptor
with DC 9V out voltage.500mA out current and cental anode plug. Insert the DC plug of power adaptor
into the DC 9V power jack in the rear panel of electronic keyboard, then, insert the other end into Mains
socket.
(Notice: The input voltage of power adaptor must conform to the voltage of Mains),finally turn on power
switch and start performance.
Attention: Disconnect the AC power adapter when not using your instrument to prevent possible damage
due to power connection for extended period of time.
Using batteries:(excluded)
• Open the battery compartment cover located on the bottom panel of the instrument . Insert eight
1.5V D size LR-20 batteries, being carefully to follow the polarity marking on the cabinet.Replace the
comnpartment cover, making sure that itlocks firmly in place.
CAUTION
• When the batteries run down,do not use differert type of batteries at the same time.
• Never mix old and new batteries. In case electroyte has leaked into the battery compartment, wipe it off
completely before installing new batteries. To prevent possible damage due to battery leakage, remove
the batteries from the compartment if it is not to be used for an extended period of time.
Using Microphone
A standard electret microphone (3.5mm) can be plugged into microphone jack.
Using headphone
A standard pair of headphones can be plugged into headphone jack for private practice or late-night
playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into
the headphones jack.
Notice: the additional device in above, you need to purchase by yourself, not include by the keyboard, pls
understand.
20