English - Buderus Logamatic EM10 Manual Del Usuario

English

English
This appliance is in conformance with the requirements of
the applicable European directives. Conformity has been
substantiated by the proper documents which - together
with the declaration of conformity - are filed with the
manufacturer.
Range of application
The module EM10 (error module) can be connected to
a boiler equipped with a EMS/MC10.
Function of the module
– The EM10 reports all Lockout malfunctions on the boiler.
System errors, service announcements, blocking
malfunctions and malfunctions of external control
devices are not reported.
– The EM10 can, via an external control voltage of 0-10 V
(rectified voltage), influence the flow temperature or
control the power of the boiler.
Installation
DANGER OF FATAL ACCIDENT
Electrical components may be live.
B Carry out work on the electrical
installation in accordance with legal
provisions.
Installation and maintenance work must
only be carried out by qualified electricians.
a) Assembly inside the control unit (
B Isolate the control unit from the power supply.
B Fit the EM10 into its position.
b) Wall mounting (
B Mark and drill the two 6 mm holes.
B Insert the wall plugs and screws and fit the wall bracket.
B If necessary, secure the wall bracket through the drill
hole ( fig. 5, [2]).
B Fit the EM10 on the wall bracket.
12
fig. 2 to 4, page 45).
fig. 5 to 8, page 45 and 46).
Module EM10
3 4 5
2
1
Fig. 1 Overview EM10
1 Terminal cover
2 Fuse holder
3 Module EM10
4 Identification plate
5 Operational/fault LED
6 Wall bracket
Module EM10 – 6 720 802 632 (2012/03)
6