Health O Meter Professional PRO PLUS 1100KL Operación Manual página 14

OPERATION INSTRUCTIONS
02 TARE WEIGHT
Before making changes to this scale setting, please refer to page 12 "Menu" to temporarily
activate the Menu key.
NOTE: Due to the scale's sensitivity, we recommend using the REWEIGH function prior to
setting the TARE weight, in order to eliminate any operator interference with the item to
be tared out.
There are two ways to manually enter a tare weight (such as the weight of a wheelchair, shoes,
etc): Press MENU (1),
If there is no weight on the scale platform (value displayed is zero and there is no tare) and the
user presses the TARE button (9), the Tare Weight window appears and prompts the user to
enter the TARE value and to press ENTER. NOTE: The tare weight must be entered using the
following increments: 4oz, 0.2lb, ¼ lb. The value entered will display in minus (-). After the TARE
has been entered, the scale goes back to normal operation. This TARE value is stored in
memory until changed or cleared. If the tare weight is not entered in 30 seconds the scale will
revert back to normal operation, and the Menu Lock will be activated.
Important: The TARE weight cannot exceed 250lb (2650KL & 2700KL)
The TARE weight canot exceed 150lb (1100KL)
TARE display
indicates the weight
that has been tared
out (Figure shows the
display after removal of
the tared weight from
the scale's platform)
Automatic Tare
The user can set a tare weight by pressing the TARE button (9) while there is a weight
on the scale platform. The display will come to zero and the word "TARE" will be
displayed to indicate there is a tare value in the memory (as displayed in Figure
above).
Removing the Tare
Additional pressing of the TARE button will delete the tare value from memory, TARE will
disappear from the display and the scale will resume normal operation.
hold for 5 seconds
and select option 02-Tare Weight or press TARE (9).
Figure 9. Tare Weight
The number that is to be changed will
flash and will move from the left to the
right after the appropriate number was
entered or by using the
and the
13
key (left)
key (right).