Troubleshooting Guide - Krups GVX1 Manual De Instrucciones

- To remove the upper bur r (5), set the
fineness selector (9) to the fine posi -
tion then take hold of the winglets
of the upper mill with your fingers
and turn clockwise, then raise it verti-
cally to remove (Fig. A)
- Carefully clean the inside of the cof-
fee-bean tank (1) with a damp cloth.
The appliance does not work.
The appliance stops during operation.
The selector of the ground fineness does
not work anymore.
- To replace the upper burr, set the
fineness selector (9) to the coarse
position, insert the burr and turn it
once in the counter-clockwise direc-
tion (Fig. A)
- Carefully clean the ground coffee
dispenser and the body of the
appliance with a damp cloth.
Trouble shooting guide
Check the electrical connection.
The lid of the coffee bean hopper is not
correctly positioned.
The ground coffee hopper is not correctly
positioned or the lid of the ground coffee
hopper is not correctly positioned or is
not in place.
The appliance has too much heated.
The thermal fuse of the motor released.
you have to contact an appro ved service
center.
Causes of overheating to be avoided:
The maximum capacity of beans in the
bean hopper, or the maximum capacity
of ground coffee in the ground coffee hol-
der has been exceeded.
Check the upper burr is correctly positio-
ned. (See paragraph concerning the
maintenance in the leaflet).
5