General Safety Instructions - Roberts 10-600 Manual De Operación

PLEASE READ THIS
MANUAL CAREFULLY
BEFORE USING TOOL.
WARNING
It is important to read
and understand these
instructions fully before
using the tool. Failure to
follow these instructions
may result in electric
shock, fire and/or
serious personal injury.
SAVE THESE

General Safety Instructions:

Work Area
Keep your work area clean and well
lit. Accidents may result from cluttered
benches and dark areas. Do not operate
power tool in explosive atmospheres,
such as in the presence of flammable
liquids, gases or heavy thick dust. Power
tools create sparks, which may ignite
such substances. Keep bystanders and
children away while operating tool. Such
distractions can cause loss of control.
Electrical Safety
• Don't expose power tool to rain or wet
conditions. Water can increase the risk
of electric shock.
• Never abuse power cord or carry the
tool by the cord or yank the cord to
disconnect it from a receptacle. Keep
cord away from heat, oil and sharp
edges at all times.
Personal Safety
• Guard against electric shock. Prevent
body contact with grounded surfaces
such as pipes, radiators, ranges, etc.
• KEEP AWAY FROM CHILDREN AND
BYSTANDERS. Do not let bystanders
come in contact with tool or extension
cord.
• Store idle tools in a dry and
locked-up place; high and out
of the reach of children.
• Stay alert when operating tool at
all times. Use common sense and
carefully watch what you are doing.
Do not operate tool if you are tired or
under the influence of drugs, alcohol or
medication.
• Ensure proper dress by NOT wearing
INSTRUCTIONS.
clothing or jewelry that may get caught
in moving parts. Wear rubber gloves
and non-skid footwear, especially when
working outdoors. Protect and contain
long hair with proper coverings.
• ALWAYS WEAR EYE PROTECTION
such as OSHA required "Z87" safety
glasses. Also consider the use of
earplugs, hard hats or other equipment
specific to the job for adequate
personal protection.
Tool Use and Care
• Do not force tool when using. Tool is
more efficient and safe when used at
the rate for which it was intended.
• Use the right tool. Do not use tool for a
purpose not intended.
• Never abuse power cord.
• Keep tools clean to maintain efficient
and safe performance. Follow
instructions for lubricating and
changing accessories. Inspect tool
cords periodically to check for damage.
If damage occurs, have the tool
repaired by an authorized facility. Keep
handles dry, clean and free from oil/
grease.
• When operating tool, DO NOT
overreach. Keep proper footing and
balance at all times.
• Disconnect tool when not in use,
before servicing and when
changing accessories.
• Avoid unintentional starting of the
tool by making sure switch is OFF
and tool is unplugged before carrying/
transporting tool.
• Use only extension cords intended for
outdoor use when operating
tool outdoors.
• Before using tool, check for damaged
parts or ensure all parts are operating
correctly and will perform as designed.
Any damaged parts
should be repaired or replaced by
an authorized facility.
• When servicing, use only identical
replacement parts ordered from
an authorized service facility. DO