body Power BRM8981 Manual Del Usuario página 10

A s s e m b l y S t e p 4
Attach the Left Pedal (#37L) onto the Left Pedal Tube (#36L)
by inserting two Hex Bolts (#38) through the aligned holes*
and securing with two Knob Nuts (#39). Repeat this process
on the other side using Right Pedal (#37R).
(Note: Please ensure the sets of selected holes match on both
sides for your safety and proper fit.)
Next, attach the Left Pedal Tube Shroud (Front) (#46L/#46R)
to the front of the Left Pedal Tube (#36L). Please make sure
the two parts are aligned and flush (you may hear the parts
gently "snapping" in place), then secure using three Screws
(#34).
Hardware Required
Bolts
#34. Screw (ST4.2x16Xφ8 mm) [6 Pieces]
#38. Hex Bolt (M8x45x20xS14 mm) [4 Pieces]
Others
#39. Knob Bolt (M8xφ60x30 mm)
[4 Pieces]
BRM8981
Assembly Instructions
There are 3 sets of hole options to tailor
the pedal settings to your preference.
Please ensure the same sets of holes
are selected on both sides.
A s s e m b l y S t e p 5
On the left side, insert the Left Handle Bar (#13L) onto the
Left Coupler Bar (#25L). Align the holes and insert two
Carriage Bolts (#14) and securing with two Arc Washers
(#16) and two Nylon Nuts (#17). Repeat this process on the
other side using Right Handle Bar (#13R).
Next, attach the Left Coupler Bar Shroud (#26F/#26R)
over the assembled Left Handle Bar (#13L). Repeat this
process on the other side using the Right Coupler Bar Shroud
(#27F/#27R).
Hardware Required
Bolts
#14. Carriage Bolt (M8x43x20xH3 mm) [4 Pieces]
Washers
#16. Arc Washer (d8xφ20x2xR16 mm) [4 Pieces]
Nuts
#17. Nylon Nut (M8xH7.5xS13 mm) [4 Pieces]
Page 9