GN Netcom Jabra Pro 9450 Guía Rápida página 6

SETUP
Step 1: Select your Setup Method
The easiest way to connect and configure the Jabra PRO 9450 is to use the Interactive Setup Wizard on the CD.
The setup section of this quick start guide is only needed if the Interactive Setup Wizard is not used.
Step 2: Select and Prepare the Headset
Attaching the Headband
1. Align the headset and the headband
wearing-style attachment, as illustrated,
and press firmly together until they click
into place (snap-to-click).
2. Rotate the microphone boom arm for left
or right ear use.
3. Adjust the length of the headband to fit
snug against the head.
Attaching the Earhook
1. Assemble the earhook wearing-style
attachment for left or right ear use. If
necessary, remove the earbud and replace
with another size for best fit.
2. Align the headset and the earhook
wearing-style attachment, as illustrated,
and press firmly together until they click
into place (snap-to-click).
3. Shape the earhook to fit snug around
the ear.
or
or
or
4
Step 3: Connect to Power
1. Plug the supplied power adapter into the port
marked on the base.
2. Connect the power adapter to the mains power
socket.
Step 4: Dock the Headset
Dock the headset. When docked correctly the
headset battery will begin charging, if needed.
Charge for 20 minutes or until battery indicator is
steady green. Keep the headset docked during
setup.
Step 5: Connect to PC
1. Plug the supplied USB cable into the port
marked on the base.
2. Connect the USB cable to any free USB slot on
the PC.
5