Installation Instructions; Electrical Requirements - Kitchen Aid KCMS185J Guía De Uso Y Cuidado

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Before you begin operating the oven, carefully read the following instructions.

1. Empty the microwave oven and clean inside it

with a soft, damp cloth. Check for damage such

as a door that isn't lined up correctly, damage

around the door, or dents inside the oven or on the

exterior. If there is any damage, do not operate the

oven until a designated service technician has

checked it and made any needed repairs.

2. Put the oven on a cart, counter, table, or shelf that

is strong enough to hold the oven and the food and

utensils you put in it. (The control side of the unit

is the heavy side. Use care when handling the

oven.) The weight of the oven is about 35 lbs (16

kg). The microwave oven should be at a tempera-

ture above 50°F (10°C) for proper operation.

NOTE: You can build your microwave oven into a

wall or cabinet by using one of the trim kits listed in

the "Built-in kits" section.

NOTE: Do not block the exhaust vents or air intake

openings. Allow a few inches of space at the back

and side of the oven where the exhaust vents are

located. Blocking the exhaust vents could cause

damage to the oven and poor cooking results. Make

sure the microwave oven legs are in place to ensure

proper airflow. If vents are blocked, a sensitive ther-

mal safety device automatically turns the oven off.

The oven should work properly once it has cooled.

wWARNING

Fire Hazard

Do not install the oven next to or over a heat

source without a UL approved trim kit.

Doing so can result in death, fire,

or electrical shock.