Alarm Setting - Eton ELITE 750 Guía De Funcionadmiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ATS (AUTO TUNING STORAGE)
MEMORY STORAGE
One can automatically store the strongest LW, AM or FM stations
into Page 0.
Turn on the radio and select the band that you want ATS to take
place in, either MW/LW or FM. Press the MW/LW or FM for 2
seconds. Notice that page 0 (P0) appears in the display's upper right
corner with the presets to the right increasing as the band is scanned
and frequencies are stored into the memory.
This setting is used to store a wake-up frequency into the alarm memory.
Turn the radio on. Tune in the station that you wish to wake to. Press the
AL1-On/Off or AL2-On-Off button for about 1 second. This stores the fre-
quency into alarm memory. You can now tune to other frequencies, but
the one memorized for wake up will always be there until you change it.
NEW ADDED FUNCTION - SORTING ALL STORED
STATION MEMORIES AUTOMATICALLY
Utilize the [AIR] button to automatically sort stored stations [
This function is able to:
1. Clearing up duplicate stations. Especially useful
after storing stations manually, as you might
sometimes store a station more than once.
2. Auto-sorting the sequence of stored stations.
- In page P0, select your desired band to find all
stored stations in sequence of frequency
(from small to large).
- For any Page, all stored stations are placed
in sequence of frequency (from small to large),
and in sequence of FM, SW, MW, Air band, LW.
How to operate the Auto Sorting memory function:
In radio-off mode, to auto sort the memory from page to page, pres-
sand hold the [
] button for 2 seconds until the memory page
number in the upper right corner starts running.
14
ELITE 750
OWNER'S MANUAL
].
Air
Auto Sorting memory
CLOCK (TIME) SETTING
The ELITE 750's clock is in 24-hour format and can be set with the
radio on or off. When the radio is turned off the clock shows in mid-
display. When the radio is turned on the clock shows in the upper
right corner of the display.
To set the clock:
1. Press the TIME button for about a second or until you see the hour
flashing.
2. While it's flashing turn the TUNING knob to set it to the correct
hour, then press TIME and note that the minutes are flashing.
3. While it's flashing turn the TUNING knob to set it to the correct
minutes, then press TIME.
Note that after setting the hour or minutes you can simply let the
flashing number time-out, without pressing the TIME button.

ALARM SETTING

The ELITE 750 has two, independently programmable alarm timers
to turn it on and off at a specified time.
To set an alarm:
1. Press the AL.1 or AL.2 button for a second or until you see the
alarm hour flashing in the upper right corner of the display. While
it's flashing adjust the hour with the TUNING knob and press the
AL.1 or AL.2 button. Notice that the alarm minutes are flashing.
2. While it's flashing adjust the alarm minutes with the TUNING knob
and press the AL.1 or AL.2 button. Notice the sleep timer flashing
in the box at the top of the display.
3. While it's flashing adjust the time that the radio is to play with the
TUNING knob and press the AL.1 or AL.2 button.
Note that after setting the hour or minutes you can simply let the
flashing number time-out, without pressing the AL.1 or AL.2 button.
Once the alarm is on (by radio or buzzer), only the POWER, SLEEP,
LIGHT/SNOOZE and RESET can be operated. Press the POWER or
SLEEP buttons to turn off the alarm.
ELITE 750
OWNER'S MANUAL
15
Tabla de contenido
loading

Tabla de contenido