Diono Radian 3 RXT Manual De Instrucciones página 22

Lift the bottom bar up and over the inside channel
toward the seat bottom to release. Confirm locked.
1
Make sure LATCH strap or vehicle seat belt is routed
through the forward-facing belt path marked with
the red text and forward-facing illustrations.
FORWARD-FACING BELT PATH
Install this car seat tightly in your vehicle. The car
seat should not move at the forward-facing belt path
location by more than 1 in. (2.5 cm) from side–to–
side, front–to–back. If using a lap belt only, refer to
your vehicles owners manual for installation advice.
Harness straps MUST be above the top of your
child's shoulders. Place chest clip at armpit level.
The American Academy of Pediatrics (AAP) and
NHTSA recommend that children be rear-facing
until they reach the maximum rear-facing height
and weight. This car seat can remain rear-facing up
to 50 lb (22.7 kg).
42
1-855-463-4666
2
INSTALL USING LATCH: 22–40 lb (10–18 kg)
DO NOT install by this method for a child weighing
more than 40 lb (18 kg). Reinstall with vehicle belt
for weights between 40–65 lb (18–29.5 kg).
1. Remove LATCH strap from
storage location 1 on back
of seat. Use LATCH release
on the LATCH connectors to
remove.
2. Extend the LATCH strap.
For easier installation, extend
the LATCH strap to its
maximum length by pressing
the grey button and pulling
on the strap.
diono.com
1
1
2
43