General; Function - REV Ritter AD 1010 Instrucciones De Instalacion Y Uso

Assembly and manual instruction

General

Before commissioning this product, please ensure that you have
read these instructions thoroughly and checked the product for
any damage. Make sure that these operating instructions are
kept in a safe place. Never use the product if it shows any signs
of damage. This product must be kept out of reach of children
and unauthorised persons. Always ensure compliance with
these instructions during installation and operation. The product
must be correctly disposed of at the end of its life service.
Electronic components must be placed with hazardous waste.

Function

Models AD 1010, AD 1020, AD 1030 differ in the number of their
internal stations and buttons on the external intercom.
Technically, they are identical.
These systems have the advantages of being easily installed
and operated. The door intercom may be used outside and is
designed to be fitted within the wall rendering
The fixing point must be protected from spray and rain water.
The connection between the door intercom and the indoor
station is via 2 core cable in each case, and this may be
extended in each case, using ordinary 2 core cable, to around
70 metres.
Using an ordinary electric door opener with its own power
supply, the entrance door can also be opened from a separate
button on the indoor station, connected with 2 core cable (one
cable per indoor station). For this, 2 core cable must be laid form
the door intercom to the door opener.
surface mounting.
12