WEBTEC HPM4000 Serie Manual Del Usuario página 33

3.2.1 the Speedcon connection
®
cautIOn
Be sure that the plastic caps are covering any unused
ports. There is no guarantee that the instrument will
be properly protected against dust and splashed water
when the inputs or outputs are uncovered. IP54 or IP67
protection is ensured only when all plastic caps are on,
or when the CAN network is in use, or when using the
CAN network or analogue sensors.
V1.0/02/12
A sensor that is connected while a measurement is being
recorded is not taken into consideration (i.e., a new chan-
nel is not displayed and the measurements from this chan-
nel are not saved).
The measurement process is continued even if a sensor
is removed during the measuring. Data recorded until the
sensor's removal is saved.
connecting the sensors
33