Installation - Gewiss Chorus GW 10 766 Manual De Usuario

Initialization with the Easy base unit
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition (the device still has the factory settings):
- select the "Application
the Easy base unit: the device will be recognized automatically.
• Manual acquisition (the factory settings have been modified):
- select the "Application
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process (figure A).
The device acquired by the Easy base unit will be listed, with the number assigned, in the
channels of the "Application
Initialization with the Easy Controller
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition:
- select the "Search/Config." or "Scan Range" command in the "System" menu;
• Manual acquisition:
- select the "Add device" menu in the "System" menu;
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process (figure A).
The device acquired is listed with a number allocated, product code and a list of the
channels in the "Devices" view.
Insert the devices into a Chorus support, making sure the local command button is at the
top.
Complete the installation with other Chorus devices or hole covers and fix it to the relative
container (flush-mounted box, wall-mounted box etc). Apply the finish plate.
INST LL TION
New function" or "Application
Search device" menu in the Easy base unit;
New function" or "Application
Completing installation
20
Edit function" menu in
Edit function" menus.