Gewiss CHORUS GW 10 716 Manual De Usuario página 38

H O
H O
The operation is useful for avoiding false alarms in cases of maintenance or in cases of
cleaning the room.
H O
In the case of an alarm it is necessary to identify the reason that has caused it and act
accordingly.
USER INSTRUCTIONS
Light signals
Programming.
Pressing the button for approximately 5 seconds
during the "test" phase causes a move to the
yellow
programming phase.
Detector cut-out.
green
Rapidly pressing the button disables the
detector. The detector returns into service
yellow
when the button is pressed again or
automatically after a time interval of 24h.
red
Alarm.
green
On arrival of the alarm signal from a sensor
the audible alarm is activated and the red LED
blinks.
red
38