Prepare the Site (cont.)
Choose the preferred location for your media module and digital mixing valve (if used), then frame
them in accordingly. Refer to the media module Install Guide for details. When installing the media
module and the digital mixing valve (if used), the recommended location for each is behind the bath
within reach of an access panel.
Provide framing for the digital interface. The recommended framing is a half-wall or "false" wall.
The recommended location for the digital interface is within comfortable reach of the bather.
Construct the front and rear access panels across the full length of the bath. Panel size and locations
may vary, but access to all serviceable components behind the bath is required.
Plumbing
Position and route the plumbing according to the roughing-in sheet packed with the bath. Include
any supply lines to valves including the digital mixing valve and/or handshower (if used).
NOTE: 3/4" valves are recommended to maximize flow and reduce fill time.
Cap the supplies and check for leaks.
IMPORTANT! Unless the bath is elevated for an above-floor drain installation, a hole will need to be cut
in the subfloor to accommodate the drain connections. Refer to the roughing-in information.
Attach the drain to the bath according to the instructions packed with the required drain. Do not
connect the trap at this time.
Place a clean drop cloth on the bottom of the basin area. This will prevent the surface of the bath
from scratching during the installation process.
Electrical
Refer to the media module Installation Guide for electrical supply requirements.
If desired, route an Ethernet cable to a router connected to a computer at this time.
Route the digital interface cable to the media module. Refer to digital interface Installation Guide for
details.
Digital Interface
Finish the false wall.
Install the digital interface. Refer to the digital interface Installation Guide for electrical supply
requirements.
Install the media module. Refer to the media module Installation Guide for electrical supply
requirements.
1078024-2-A
6
Kohler Co.