Axis 1650 Manual Del Usuario página 16

Page 16
Faxing
If the AXIS 1650 is connected to a multifunctional Canon device with fax capabilities,
follow these instructions to:
• install the fax driver for your MFP
• configure the port settings for faxing
Notes:
• The following information applies to AXIS 1650 with firmware version 2.10 and above.
• Make sure that the printer and print server have been installed according to the AXIS 1650 Set-up Instructions.
Install the fax driver for your MFP
In order to set up the faxing functionality, a fax driver must be installed for your MFP.
1. Run the Windows 'Add Printer wizard'.
2. Follow the on-screen instructions to install the fax driver.
3. When asked for a Printer Port, select the printer port created in the printer driver
installation for AXIS 1650. See "Set up port in Windows" on page 10.
4. When the installation is complete, you will find a separate Fax object in your Printers
and Faxes list.
Configure the port settings for faxing
Once the fax driver has been installed, follow these instructions to configure the port settings for faxing:
1. Go to Start | Settings | Printers and Faxes.
2. Select the connected Canon Fax device from the list, right click and select Properties.
3. Select the Ports tab and select Configure Port.
4. In the Configure Standard TCP/IP Port Monitor dialog, select the LPR radio button and type fax in the
LPR Settings > Queue name field.
5. Click OK.
The port settings are now configured for faxing.
AXIS 1650 Set-up Instructions