Elcometer 456 Serie Instrucciones De Uso página 2

R
Hg
Pb
These operation instructions are a short User Guide only. A copy of both this Instruction Manual and an English language extended version are available for
download on our website elcometer.com. For the avoidance of doubt, please refer to the original English language version.
The Elcometer 456 is available in 4 models. This User Guide is written for the Model T. Where applicable the Model E, Model B and Model S are referenced.
The Elcometer 456 Models B, S & T meet the Radio and Telecommunications Terminal Equipment Directive. The Model E meets the
Electromagnetic Compatibility Directive. This product is Class B, Group 1 ISM equipment according to CISPR 11. Class B product: Suitable for
use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used
for domestic purposes. Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled radio-
frequency energy which is necessary for the internal functioning of the equipment itself.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by Elcometer Limited could void the user's authority to operate the equipment under FCC rules.
This Class B digital apparatus complies with Canadian ICES-003
is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU. United Kingdom
R
are trademarks owned by Bluetooth SIG Inc and licensed to Elcometer Limited. Bluetooth SIG QDID = B014393
All other trademarks acknowledged.
Gauge dimensions: 140 x 720 x 450mm (5.51 x 2.83 x 1.77"). Gauge Weight: 154g (5.43oz) including batteries.
Applicable patents: US6243 661; US5886522; US6762603; US7606671; GB2306009; GB2367135; GB2342450, DE10131827
© Elcometer Limited 2011. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise)
or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written
permission of Elcometer Limited.
TMA-0488 Issue 02 - Text with cover 22373