Taurus Alpatec RABAT 600 Manual De Instrucciones página 11

it is not in use, even if it is only for a short while,
as proximity to water involves a risk, even if the
appliance is disconnected.
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not store or transport the appliance if it is still
hot.
- Do not expose the appliance to extreme tempe-
ratures.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance connected and
unattended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance to dry textiles of any
kind.
Service:
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
- CAUTION: There is a risk of fire if the
appliance's cleaning is not done according to
these instructions.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Installation
- Install the appliance away from flammable mate-
rial such as textiles, cardboard or paper, etc.
- Install the appliance a minimum distance of
50cm away from combustible materials, such as
curtains, furniture ...
- Ensure that neither the air access nor exit beco-
me either totally or partially covered by drapery,
clothing, etc., as this increases the risk of fire.
- In the event that the appliance is mounted on a
bathroom wall, position it in such a way that the
socket, power supply cable, switches or other
controls are not within the reach a person in the
bath, shower or at the wash-hand basin.
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 30 cm
between walls or other obstacles and 30cm from
the floor.
- Do not cover or obstruct any of the openings of
the appliance.
- Do not cover or obstruct the sides of the
appliance, leave a minimum space of 2cm around
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
- To achieve the highest efficiency from the
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
- To achieve the highest efficiency from the
appliance and so as to be able to install the
appliance on a cold wall (an exterior wall) and be-
low a window. But never obstructing or covering a
ventilation area.
- The appliance should work well with its wall
support attached or with its base/feet attached.
- The appliance has a wall bracket (G) on which it
can be supported.
Assembling the wall bracket:
- The appliance has a wall bracket (G) on which it
can be supported.
- Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
the wall (fig 1).
- Drill into the wall where marked and insert the
rawlplugs (fig 2).
- Place the support by matching the holes with
the rawlplugs and screw in firmly (fig 3).
- Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
appliance.
- Fit the appliance into the wall support.
Fitting the base feet:
- To assemble the base feet, place the appliance
face down.
- Position the base feet on the body of the
appliance using the (I) screws. (Provided with the
appliance)
- Stand the appliance up again so as to check
that the base feet work properly.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
- Prepare the appliance according to the function
you wish to use:
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.