Charging The Fx 200 Batteries P; Turning The Radio On And Off P - LOGICOM FX 100 Manual De Uso

Charging the batteries of the FX 200
Do not dismantle or open the battery unit.
To charge the rechargeable batteries:
• Insert one of the jack plugs from the supply plug underneath the FX 200.
• Plug into the wall plug (220 V).
• The lights on the 'power LED' flash. If the LED do not flash, the batteries have been incorrectly
Alimentation secteur
installed. Check the polarity of the batteries and if necessary turn them around.
Note : remove the radio after 16 hours to ensure that the batteries attain their maximum life. Do not charge the batteries
beyond this period, because the lights will not flash or turn off to indicate that the batteries have been charged.
Caution : Your radio will emit a beep when the cells are running low.
NB : Remove the batteries if not using the 2 way radio for a long period. Batteries corrode with time and may permanently
damage the 2 way radio. Pay particular attention when dealing with leaking batteries. Dispose of used batteries at a waste
collection centre or in a recycling container for batteries, and not in a domestic rubbish bin. Information on battery recycling
may be requested from your retailer.
Turning the radio on and off
• To turn the radio on, press the key until the radio emits a beep and a channel number appears. MENU
• To turn the radio off, press the key until the radio emits a beep and the screen becomes empty.
MENU
24