Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Error Codes
An error code may be displayed if resetting the zero o set fails.
Please note the possible error codes below and corrective action that
should be taken.
Code #s Corrective Action
Simply attempt zero reset again. If code remains after several
1,2,4,16
attempts please contact Stages Cycling – Technical Support.
Power meter crank not in proper position (straight down) see FIG 8.
32
If no power (watts) or cadence (RPM) signal is being received by your
compatible display unit when riding the bike, please con rm the following
items:
1. Con rm that a working CR2032 battery is properly installed in the
power meter according to the reference FIGs 1-6 of this manual.
2. Ride the bike with a pedaling cadence of greater than 20 RPM. Your
Stages Power meter will not send cadence or wattage to the display
unless a true pedaling force is applied. If you pedal your bicycle in the
work stand the display will not show cadence or watts — this is not a
problem — as soon as you ride the bike you will see your
cadence and power values displayed.
3. Ensure that the power meter has been successfully paired to the display
unit being used according the manufacturer's speci c instructions.
4. For further assistance with Troubleshooting, FAQs, videos and useful tips,
please visit our website at: www.stagescycling.com/support
The StagesPower App may be used to con rm device communication, verify
and update the rmware. Vist www.stagescycling.com/support-app for
additional information and links to the app store.
9
Tabla de contenido
