Other Methods Of Setting The Ip Address - Axis Q1602 Guia De Instalacion

AXIS Q1602/Q1604 Network Camera Installation Guide

Other methods of setting the IP address

The table below shows the other methods available for setting or discovering the IP address. All
methods are enabled by default, and all can be disabled.
Use in operating
system
All
AVHS Service
Connection
Windows
UPnP™
MAC OSX
Bonjour
(10.4 or later)
All
AXIS Dynamic DNS
Service
All
ARP/Ping
All
DHCP server
AXIS Video Hosting System (AVHS)
The camera can also be connected to an AVHS service for hosted video. If you have subscribed to an
AVHS service, follow the instructions in the Service Provider's Installation Guide. For more
information and help to find a local AVHS Service Provider, go to www.axis.com/hosting
A Camera owner authentication key is supplied with this product. The key is associated with the
camera's unique serial number (S/N) as shown on the top of the label.
Note: Save the key for future reference.
Notes
To connect the camera to an AVHS service, refer to the service
provider's Installation guide. For information and help to find a
local AVHS Service Provider go to www.axis.com/hosting
When enabled on your computer, the camera is automatically
detected and added to My Network Places/Network.
Applicable to browsers with support for Bonjour. Navigate to the
Bonjour bookmark in your browser (e.g. Safari) and click on the
link to access the camera's web pages.
A free service from Axis that allows you to quickly and simply
install your camera. Requires an Internet connection with no
HTTP proxy. See www.axiscam.net for more information.
See below. The command must be issued within 2 minutes of
connecting power to the camera.
To view the admin pages for the network DHCP server, see the
server's own documentation.
Page 15