1. Put the hose clamp over the end of the auto-pump drainage hose by squeezing the 2 tabs of the clamp together, this will open the clamp to slide onto the hose.
2. Push the drainage hose over the auto-pump drainage outlet.
3. Push the hose clamp over the outlet to secure the hose.
4. Put the draining end of the hose over any suitable area where water can be emptied: a sink, drain or window. Be sure the water flows away from the building or any other
objects that could be damaged.
AUTO-PUMP SYSTEM
1. Put the hose clamp over the end of the auto-pump drainage hose by squeezing the 2 tabs of the clamp together, this will open the clamp to slide onto the hose.
2. Push the drainage hose over the auto-pump drainage outlet.
3. Push the hose clamp over the outlet to secure the hose.
4. Put the draining end of the hose over any suitable area where water can be emptied: a sink, drain or window. Be sure the water flows away from the building or any other
objects that could be damaged.
Note: The draining hose must not be put more than 10 feet above the floor on which the unit is standing.