Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Diagnostic Tool
Bematech's Diagnostic Tool Utility is an integrated tool incorporating features that enable you to explore a printer's settings/status;
change a printer's settings; download graphics, fonts and firmware; create a printer bitmap font; and send additional commands to a
printer. With the aid of this powerful tool, you can review printer status and settings in an instant, which make it much easier to
troubleshoot problems and other issues.
Start the Diagnostic Tool:
(1) Double click on the Diagnostic tool icon
(2) There are four features (Printer Configuration, File Manager, Bitmap Font Manager, Command Tool) included in the Diagnostic
utility.
Features tab
Printer functions
Printer Status
(2) The detail functions in the Printer Function Group are listed as below.
Function
Calibrate Sensor
Calibrate the sensor specified in the Printer Setup group media sensor field
Ethernet Setup
Setup the IP address, subnet mask, gateway for the on board Ethernet
RTC Time
Synchronize printer Real Time Clock with PC
Print Test Page
Print a test page
Reset Printer
Reboot printer
Factory Default
Initialize the printer and restore the settings to factory default.
Dump Text
To activate the printer dump mode.
Ignore AUTO.BAS
Ignore the downloaded AUTO.BAS program
! "
Configuration Page
Print printer configuration
Password Setup
Set the password to protect the settings
#
$
* For more information and features about this printer, please refer to the User's Manual. The User's Manual can be
downloaded at Bematech website:
www.bematech.com
* Specifications, accessories, parts and programs are subject to change without notice.
to start the software.
Interface
Printer setup
Description
P/N: 501012500
Tabla de contenido
