Uline H-7978 Manual De Instrucciones página 2

NOTE: The printer has two indicators – power (blue light) and error (red light) and
two buttons – pause and feed.
INDICATORS
INDICATOR STATUS
Power indicator (6) is on.
Error indicator (7) is off.
Power indicator (6) flashes slowly.
Error indicator (7) is off.
Power indicator (6) flashes fast.
Error indicator (7) is off.
Power indicator (6) is off.
Error indicator (7) flashes fast.
Power indicator (6) is off.
Error indicator (7) flashes slowly.
Power indicator (6) flashes fast.
Error indicator (7) flashes fast.
BUTTONS
FUNCTION
Feed
Pause
Self-Test
Gap Sensor
Calibration
Dump Mode
PAGE 2 OF 24
OVERVIEW OF CONTROLS CONTINUED
Printer is powered and in normal print mode.
Printer is paused.
Printed label is peel-off but not taken off.
Printer cover is open.
Paper shortage or gap sensor calibration error.
Printer overheat protection is activated. After one minute,
the printer will recheck the temperature of the printhead.
Press the feed button (9) when power indicator is on and error indicator is off.
Label feeds to the beginning of the next label.
Press the pause button (8) during printing and the printing job is suspended.
1. Turn off the printer power (10).
2. Make sure label roll is installed correctly and printer top cover is closed.
3. Press the feed button (9) and turn on the printer power simultaneously. When
the self-test paper prints out, release the feed button.
1. Turn on the printer power (10).
2. Make sure the label roll is installed correctly and the top cover is closed.
3. Press and hold the pause button (8), then turn the printer power on. The
printer will automatically calibrate the gap sensor sensitivity and save the
gap length into DRAM. Release the pause button.
1. Turn on the printer power (10).
2. Make sure the label roll is installed correctly and the top cover is closed.
3. Press and hold the pause (8) and feed (9) buttons, then turn on the printer
power. When the power indicator (blue light) and error indicator (red light)
light simultaneously, release both buttons. The printer changes to dump mode.
PRINTER STATUS
DESCRIPTION
0319 IH-7978