Connect Your Hardware To The Raspberry Pi - Velleman VM205 Manual De Instrucciones

Connect your hardware to the Raspberry Pi

Connect your hardware to the Raspberry Pi
CONNECT YOUR HARDWARE TO THE RASPBERRY PI
1
PLUG ON
THE VM205
CARD
2
INSERT SD
CARD
6
POWER UP
3B
When HDMI is not
used, plug in your
analogue display
3A
HDMI
DISPLAY
- 6 -
4
HARDWARE
INPUT
5
ETHERNET
*
not necessary
1. Mount the VM205 shield onto the Raspberry Pi.
2. Insert the SD card with Raspbian image.
3. Connect your type monitor:
a. Digital monitor:
use a HDMI to HDMI lead (for HD TVs and monitors
with HDMI input) or HDMI to DVI lead (for monitors with DVI input)
b. Analogue monitor:
use a standard RCA composite video lead and
the 3.5mm jack next to the RCA connector for stereo audio.
4. Plug in a USB keyboard and mouse.
5. Connect to you wired network.
6. Plug in a micro USB power supply.