Installation; Installation Of Mounting Plate - Electrolux EPI12NLIW Manual Del Usuario

Installation

Step 1: Installation of Mounting Plate
1 Fit the mounting plate horizontally on the wall
2 Be sure that the mounting plate has been
Meanwhile, the weight should be evenly shared
by every screw.
3 If the wall is made of brick, concrete or the like,
the wall. Insert clip anchor (item 2 on page 3)
for appropriate mounting screws.
The water tray's outlet for the indoor unit is two-
way drainage design. During installation, the
indoor unit should slightly slant to water tray's
outlet for smooth drainage of condenser water.
Mounting Plate Type A
Fit the mounting plate and drill holes in the wall
according to the wall structure and correcponding
mounting points on the mounting plate.
(dimensions are in mm unless otherwise stated)
Indoor Unit
Dimension mm
Model Number
(WxDxH)
EPI09NLIW
EPI12NLIW
Mounting
Plate Type
A
A
8