Cleaning And Maintenance - Turbosaver TS-1400B Manual De Usuario

press the Manual Seal button to seal the bag.
Vacuum Package in a Canister & Vacuum Bowl
1.
Wipe canister cover, canister base and ensure they are clean and dry.
2.
Put the items into the canister and do not fill up too full so that the cover can be in
good contact with the canister bowl rim. Clean the cover rim of the canister and bottom
seal gasket of the canister cover;
3.
Insert one end of the hose into the ACC PORT on the unit and another end of the hose
into the center hole of the canister cover
4.
Press the canister button to start vacuuming. To ensure there is no air leaking between
the cover and the canister, use your hand to push down the cover at the beginning of the
vacuuming work. The machine will stop automatically when enough vacuum pressure is
achieved.
5.
Take out the hose tube from the canister or bowl immediately first after the job is
completed.
Open Canister After Vacuum Packaging
In order to open the canister, you need to press the "Release "button on the canister
cover.
NOTE:
• At the beginning of the vacuum packaging in a canister or a vacuum bowl, slightly
press down the cover or on the hose adaptor to ensure no loose of the hose and to
avoid air leaking through the gap between the cover and the canister top rim for a few
seconds.
• To test vacuum, simply tug on the cover. It shall not move;
• Different canisters are available in the market and also from Bigland. The operation
procedure will be a little different. Please refer to the individual manual for the specific
canister.
• For best effect, it is better to let the appliance cool down for 1 minute before using it
again.
Cord Storage Box
Put the power cord into the storage box when not use the machine which is in the bot-
tom of the machine. Do not wrap the cord around the appliance.

CLEANING AND MAINTENANCE

Vacuum Sealer
1.
Always unplug the unit before cleaning.
20