Klarstein 10029239 Manual Del Usuario página 25

Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set
time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. Note: you can use the minute minder even if you're not selecting any
cooking zone.
2. Touch timer control , The minder indicator will start flashing and "30" will show in the timer display.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-" control of the timer once to
decrease or increase by 1 minute. Hold the „+/-" control of the timer to decrease or increase by 10 minutes.
Scrolling the „-" to the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will show the remaining time and
the timer indicator will flash for 5 seconds.
5. Buzzer will beeps for 30 seconds and the timer indicator shows "- - " when the setting time finished.
Setting the timer to turn one or more cooking zones off
1. Select a heating zone by touching „+/-" control, and a indicator between the key will flash, the default
power setting is levels "5"
2. Touch timer control , The minder indicator will start flashing and "30" will show in the timer display.
3. Set the time by touching the „+/-" control of the timer. Hint: Touch the „+/-" control of the timer once to
decrease or increase by 1 minute. Hold the „+/-" control of the timer to decrease or increase by 10 minutes.
Scrolling the „-" to the "00",the timer is cancelled.
4. When the time is set, it will begin to count down immediately. The display will show
the remaining time and the timer indicator will flash for 5 seconds. The red dot next to
power level indicator will illuminate indicating that zone is selected.
5. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
NOTE: If you want to change the time after the timer is set, you have to start from step 1. Other cooking zone
will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones simul-
taneously, decimal dots of the relevant cooking zones are
on. The minute display shows the min. timer. The dot of
the corresponding zone flashes.
25