TONDEO CERION Premium Modo De Empleo página 5

INSTRUCTIONS
Please read these instructions carefully before using your CERION Premium.
Thank you for choosing a TONDEO product. CERION Premium hair straighteners are high-quality, profes-
sional straighteners that meet the most demanding requirements:
• Ready to use in seconds as it warms up very quickly.
• Individual temperature adjustment (120°C–230°C), selectable for any hair type.
• Ceramic-tourmaline runners with pearl powder sealing
• Care Plus for beautiful hair. The plates dusted with tourmaline generate nurturing ions when they
are heated up. These ions promote the absorption of natural moisture into the hair.
• Thanks to the pearl powder sealing, the runners glide through the hair especially gently and close
the scaly layer for optimum protection.
• Optimal heat distribution by ceramic-coated plates. The hair is gently shaped and its shine is
restored.
• Avoid excessive pressure thanks to the plates suspension system.
• Perfect touch every time with the pleasant colour injection surface.
• Plenty of freedom of movement, no tangled cables thanks to the swivel cord.
• The Auto Off function switches the straightener off automatically after 60 minutes.
USE
• Plug in your CERION Premium straighteners.
• Switch on the device by pressing the on/off button (I/0) until you hear the signal tone.
• Use the setting dial to set the required temperature (120–230°): For fine hair, the best results are
achieved at low temperatures. For hair that is thick, curly, or unruly, a higher temperature should be
chosen. It takes a few seconds for the straighteners to reach their operating temperature. Once this
temperature has been reached, the signal tone sounds three times. Thanks to the built-in energy-saving
system, the power consumption of the CERION Premium is now minimal.
• Separate your dry hair into even parts and comb through before styling.
• Slide each section of hair to be straightened through the plates of your straighteners.
• Switch off the device by pressing the on/off button (I/0) until you hear the signal tone.
WARNING!
The straightening plates become quite hot after just a few seconds. Once you have switched
on your straighteners, be careful not to let the plates come into contact with your skin. If set
to the highest temperature, the straightening plates become extremely hot. Test the temperature on a
small section of hair first to ensure that the temperature setting is suitable for the hair type.
CLEANING
Always unplug the device and let it cool down before cleaning it. Then simply wipe down the straighteners
with a damp cloth. Do not use corrosive chemicals or aggressive/abrasive cleaning agents. The device must
be completely dry before you use it again.