STEP 1
Attach side brace B to two frames A:
• Pull L-shape lock pin at each end of side
brace to the disengaged position.
(See Figure B)
• While holding L-shape pin
• lock
end of side brace B around leg of frame A
at desired platform height.
• Release lock pin and be sure that pin fully
engages into hole in frame A leg.
STEP 2
Attach second side brace B to both frames A (REPEAT INSTRUCTIONS IN STEP 1).
WARNING:
• BOTH SIDE BRACES MUST BE POSITIONED AT THE SAME HEIGHT ON THE FRAMES
SO THAT THE PLATFORM WILL BE LEVEL.
• BE SURE ALL 4 L-SHAPE LOCK PINS ARE FULLY ENGAGED IN HOLES OF FRAMES.
• REMOVE THE PLATFORM BEFORE ADJUSTING THE DECK LEVEL.
STEP 3
Install platform C on side braces B so that platform is fully seated within inner channel on top of side
braces.
STEP 4
Rotate the platform clips into the engaged
position. (See Figure C)
STEP 5
Install 4 casters D into legs of frames A and with Connector Pins F.
GSSI Multi-Use Scaffolding Assembly & Operating Instructions
in disengaged position,
place U-channel on each
Lock Pin Is Disengaged (Unlocked Position)
Lock Pin Is Fully Engaged (Locked Position)
Figure B
Figure C
3
