Controls - AKG SO 40 Modo De Empleo

Ocultar thumbs Ver también para SO 40:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Fig. 1: SO 40 controls.
SO 40 snapon
2.5 Controls (refer to fig. 1)
1 ON/MUTE/OFF: This slide switch provides
three positions:
ON: Power to the transmitter is on.
M: The signal delivered by the microphone is
muted while power and the RF carrier frequen-
cy remain on. This prevents the receiver from
respond ing to interference from other transmit-
ters.
OFF: Power to the transmitter is off.
2 Battery compartment for one 1.5-V AAA size
battery (supplied).
3 Status LED: Indicates battery status.
LED flashes momentarily upon switching ON
and extinguishes: battery is OK.
LED lights constantly: battery will be dead in
about 60 minutes.
4 Input Gain: This rotary pot sets the sensitivity
of the transmitter's audio section.
5 XLR connector: 3-pin female standard XLR
connector for connecting the transmitter di-
rectly to a microphone with a 3-pin male XLR
connector.
See also section 3.
6 Unlocking button for the XLR connector.
13
Tabla de contenido
loading

Tabla de contenido