About This Guide - Chauvet DJ D-Fi Hub Guía De Referencia Rápida

D-Fi™ Hub QRG

About this Guide

Disclaimer
Safety Notes
Contact
The D-Fi™ Hub Quick Reference Guide (QRG) has basic product
information such as mounting and programming options. For more
information, download the User Manual from the Chauvet website:
http://www.chauvetlighting.com/product-manuals-literature/.
The information and specifications contained in this QRG are subject to change
without notice.
These Safety Notes include important information about installation, use, and
maintenance.
·
Always connect the product to a grounded circuit.
·
Make sure the power cord is not crimped or damaged.
·
Always disconnect the product from the power source before cleaning it.
·
Never disconnect the product from the power source by pulling or tugging on
the cord.
·
If mounting the product overhead, make sure there is adequate support for the
product's weight and always secure the product using a safety cable.
·
Make sure there are no flammable materials close to the product when it is
operating.
·
Avoid direct eye exposure to the light sources while the product is on.
·
Do not touch the product's housing when the product is operating because the
housing can be very hot.
·
The product is not intended for permanent installation.
·
The product is for indoor use only! It is rated at IP20.
·
To prevent risk of fire or shock, do not expose the product to rain or
moisture.
·
Always make sure that the voltage of the power source to which the product
is connected is within the range stated on the label or rear panel of the
product.
·
Never connect the product to a dimmer or rheostat.
·
Always install the product in a location with adequate ventilation, and leave
at least 20 in (50 cm) between the product and adjacent surfaces.
·
The maximum ambient temperature (Ta) in which the product can be used is
104 °F (40 °C). Do not operate the product at higher temperatures.
·
Be sure that no ventilation slots on the product's housing are blocked.
·
Never carry the product by the power cord or any moving part.
·
In the event of a serious operating problem, stop using the product
immediately.
·
Never try to repair the product. Repairs carried out by unskilled people can
lead to damage or malfunction. Contact the nearest authorized technical
assistance center.
·
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
·
From outside the U.S., UK, Ireland, Mexico, or Belgium, contact the
distributor of record to request support or return a product.
·
From inside the U.S., UK, Ireland, Mexico, or Belgium, use the information
in Contact Us at the end of this QRG.
EN