Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
q
e
o
!0 !1
!4
!5
!6
NOTE: The triangle symbol marked as "▽" following its tool serial number indicates that safety yoke is equipped with this tool.
2. TOOL SPECIFICATIONS
PRODUCT NO.
TI-C4
HEIGHT
18-1/4˝ (467 mm)
WIDTH
4-3/4˝ (122 mm)
LENGTH
17-3/4˝ (450 mm)
9.7 lbs. (4.4 kg)
WEIGHT
(including Fuel Cell and Battery)
LOADING CAPACITY
40 pins
BATTERY
Battery (Cat.#55583)
BATTERY CAPACITY
6V DC, 1.5 Ah
CHARGER
Charger Base (Cat.#55618)
POWER SOURCE
100-240V AC, 50 or 60 Hz
POWER CONSUMPTION
8VA (10V 800mA)
(Rated output)
CHARGING TIME
150 minutes at maximum
Goggles, carrying case, Battery,
ACCESSORIES
Charger
4. TECHNICAL DATA
q NOISE
A-weighted single-event ------ LWA, 1s, d 113.16 dB
sound power level
A-weighted single-event ------ L p A , 1s, d 105.06 dB
emission sound pressure
level at work station
These values are determined and documented in accordance to EN12549 : 1999.
w VIBRATION
Vibration characteristic value
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system when using the tool.
An influence to the hand-arm-system when using the tool will for example depend on the gripping force, the contact pressure
force, the working direction, the workpiece, the workpiece support.
w
r
y
u
i
t
!3
!2
@0
!7
@1
!8
!9
＝ 5.93 m/s
2
q Air Filter Cover
w Actuator
e Housing
r LED
t Trigger
y Battery
u Hook
i Pin Stopper
o Contact Arm
!0 Follower Holder
!1 Follower
!2 Magazine
@2
3. FASTENER SPECIFICATIONS
PIN LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
11
!3 Magazine Foot
!4 Pack Cap
!5 Terminal Block
!6 Battery (Cat.#55583)
!7 Battery Setting Hollow
!8 Jack
!9 Power Cord
@0 Charger Base(Cat.#55618)
@1 Power Plug
@2 AC Adapter
3/4˝ to 2-1/2˝ (19 to 65 mm)
.102˝, .145˝ (2.6, 3.7 mm)
Smooth
.252˝ (6.5 mm)
Capítulos
Tabla de contenido
