Battery Replacement; Direct Plug-In Transformer - Welch Allyn 75260 Instrucciones De Operación

Battery Replacement

• Be sure power is off.
• Remove both screws from back of power source with Phillips head
screwdriver.
• Grasp the belt clip, gently pull back and down on the housing.
(Steps 2 and 3)
• Lift battery out and unplug from unit.
• Replace with new battery and reverse above steps.
Step 1
Step 3
NOTE: Power source housing screws must be securely tightened in
order to properly hold electrical components in place.

Direct Plug-In Transformer

• Plug Power cord from the binocular otoscope into the Direct
Plug-In Power cord.
• Push in until firmly in place.
• Gently screw the external connector sleeve clockwise to
secure (optional).
• The instrument is now ready for use.
• Plug direct power source into a nearby receptacle.
Screws
Step 2
Step 4
To instrument
7